Download the PDF consolidation of Part 92 [PDF 169 KB]

In this subpart:

92.101 Applicability

(a) This Subpart prescribes rules governing the offer of dangerous goods for carriage by air.

(b) A person who performs a function required by this Subpart on behalf of the person who offers the dangerous goods for carriage by air, m u s t perform that function in accordance with this Subpart.

92.103 Offer of dangerous goods

A person who offers a package or overpack containing dangerous goods for carriage by air must ensure that—

(1) the dangerous goods are not forbidden under the Technical Instructions for carriage by air; and

(2) the dangerous goods are certified in accordance with this Subpart; and

(3) the dangerous goods are packaged, packed, marked, and labelled in the manner described in Subpart B; and

(4) when required by the Technical Instructions, the dangerous goods are accompanied by a dangerous goods transport document that has been executed and signed in accordance with rule 92.105; and

(5) they have otherwise complied with the Technical Instructions.

92.105 Dangerous goods transport document

(a) A person who offers dangerous goods for carriage by air must, subject to rule 92.103(4), provide the operator with 2 copies of a completed and signed dangerous goods transport document that—

(1) accurately describes the dangerous goods in the following order by their—

(i) proper shipping name; and

(ii) class or, when assigned, division, including for Class 1, compatibility group; and

(iii) UN number, if any, preceded by the letters UN; and

(iv) where assigned, the appropriate packing group; and

(2) bears the following declaration signed by the person who offered the dangerous goods for carriage by air:

I hereby declare that the contents of this consignment are fully and accurately described above by the proper shipping name, and are classified, packaged, marked, and labelled/placarded, and are in all respects in proper condition for transport according to applicable international and national governmental regulations; and

(3) complies with any additional requirements prescribed by the Technical Instructions.

(b) The declaration required by paragraph (a)(2) may omit the reference to placarded, where appropriate.

 

Subpart B

Subpart D